Monitor For FNN Series Electronic Compass
1.Notice of using monitor for Three-Axis Electronic Compass：
（1）Avoid voilent impact, scoring and pressure on the monitor. The inclinometer monitor should be operating within the temperature range between -45 ℃ to +85℃,and be stored within -50℃ to +90℃.
（2）The cable of the monitor is for the inclinometer monitor using only,conneting to other instruments is forbidden.When assembling and disassembling the aviation electric connector, only screw up or screw off the embossing parts of the aviation electric connector,DO NOT screw any other part,in case of any damage on the cable.
（3）The power supply voltage range is 9V to 15V.Typical power supply voltage is 12V.
（4）The protection level of the monitor is IP64.
2.Description of function keys：
KEY | function |
Set To Zero | Set the output of the electronic compass to zero according to current plane. |
Reset | Reset the output of the electronic compass to factory defalt. |
Swtich | Switch between display of pitch angle and roll angle. |
Frequency | Switch between different output frequencies. |
Calibrate Begin | Start calibrating. |
Calibrate Finish | Finish calibrating. |
Notie：The Calibrate Begin key combined with Calibrate Finish key is used to accomplish calibrating. Firstly,locate the electronic compass any plane and press Calibrate Begin key.Secondly, rotate the electronic compass to 360 degree slowly ,then press Calibrate Finish key to finish calibration.
3.Size：
Outline size：145mm×77mm×25mm.
Download：
Monitor For FNN Series Electronic Compass.pdf
info@tuoluoyi.com
Click send email!
ICP shaanxi N0.07501210 
陕公网安备 61010202000244 No. Address: Xi'an City,Jinhua North Road, No.169 Zip code:710032 Telephone:86-029-82501390 86-029-82501710 Fax:86-029-82501150
Copyright ©2010-2013 Shaanxi Aerospace the Great Wall measurement and Control Co., Ltd. Copyright
简体中文
English