Two-axis stabilized platform

A two-axis stabilized platform Description:

Gyro-stabilized ring and horizontal two-axis stabilized platform use gyroscope sensor configuration to achieve a two-axis stabilized loop stability.

1  Stable platform

Platform ship roll angle 300, period five seconds, pitching angle150 , under eight seconds cycle to ensure stable roll angle accuracy 10, pitching angle stabilization accuracy 10.

 Platform motion parameters: As shown in Table 1.

 Table 1  platform motion parameters

  (Note: Assume X axis parallel to the deck level, point the bow)

Ship motion parameters: As shown in Table 2.

 Table 2   Ship Motion Parameters

 Stability isolation：             30dB

Stability and accuracy: 

               Roll angle：                  ≤±1°

               Pitching angle：           ≤±1°

              Platform weight：        ≤ 15kg

              Load platform：           ≥5kg

              Antenna size：             ≤Φ250x850(mm)

             Platform Size：             ≤ 250x250x200(mm)

             Power supply：            AC220V  50Hz      

2  Environmental conditions

           Structural strength: to ensure that wind speed 60m / s does not destroy;

           Operating temperature： -400C ~ +700C；

          Humidity： When the air temperature250C300C，Humidity 100%93%；

          Equipment should prevent moisture, salt spray, anti-fungal;

3  Reliability and maintainability

       Equipment Reliability, Maintainability:

       MTBF≥25000 hour

       MTTR≤0.4 hour

Download:Two-axis stabilized platform.pdf